Re: 90q 10v code dump

["Michael Lemon" <mlemon90q@butter.toast.net>]

---------- Original Message -
>is there a procedure anywhere on how to dump the codes on a 90q? is it
>the same as the 20v?
>TIA
>Bob
>
>
Hey Bob,
Not sure 'bout the 20v, but on my 10v there is a slot to insert a fuse on the fuel pump relay. With the car running, insert a spare fuse, than remove it. Your CHECK ENGINE light should come on and will stay on for a few seconds. Once it goes off, it will start flashing, pause then flash again. Count the flashes between pauses. The end of the sequence will be one long flash.
HTH  If anyone has more detail or corrections, please jump in! :-)



--
Michael Lemon
Kansas City, MO
'88 90q
--