Re: Rolling cars without axles

["Doyt W. Echelberger" <Doyt@nwonline.net>]

>To: DGraber460@aol.com
>From: "Doyt W. Echelberger" <Doyt@nwonline.net>
>Subject: Re: Rolling cars without axles
>In-Reply-To: <0.f1f35d4d.2564eb33@aol.com>
>
>"Do not move vehicle without axle shaft or CV joint installed, otherwise
wheel bearing will be damaged."   Bentley, 40.6  84-88 5k Vol. 1
>
>Doyt
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>
>
>At 12:40 AM 11/18/1999 EST, you wrote:
>>After taking the axle shafts out of the CGT, I noticed that the wheels
(even 
>>though bolted tight) would wobble on the bearings. Is it risking pulling
the 
>>pressed in bearings out to roll the car around without the axles to secure 
>>them?
>>
>>Dennis
>>