[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: K24 finally installed in 1986 5000cstq
Eric_R_Kissell@email.whirlpool.com decided to speak these words:
>I do not yet have an aftermarket boost gauge, so all of my boost readings
>are from the dash readout. I still need more/better data, but as a first
>pass my MC-1/k24 gives the following:
>
>1.3 bar 1800 rpm
>1.5 bar 2000 rpm
>1.8 bar shy of 3000 rpm
Really? That's interesting. That is about what i get in my UrQ with the
MC-1 and the K26. Of course, that is only in the higher gears, and
depending on the way i throttle the car, but i can usually get boost by
about 1500 rpm if i wanted to in the higher gears... of course, i have
also figured out how to get the 12lbs of boost with no load on the
engine, just sitting still...but that is a whole other story...hehe
later...
Michael Sheridan Williams
San Francisco, CA
ICQ# 11740998
1983 UrQuattro, MC--1.8 BAR, borla, 2B Coilover/Koni Yellows, Delrin
Bushings f/r, 16x7.5 OZ Mito's w/ Yoko A520's, Cibie H4/H1's, K&N (blah)
1985 4000S Quattro, Koni Yellows/Coilover (2B), strut brace, Sport 8000
Tires, K&N
http://members.aol.com/daserde2