[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Diffs not working
"Adam P. Brodeur" wrote:
> Hi all,
>
> PLEASE HELP. After installing an aftermarket radio in my 84 4ksq, the
> center and rear diffs do not lock. I took apart the dash to take a
> closer inspection and grabbed the Bentley. I think I may have cracked
> the valve, but don't see any cracks. What do you think could be wrong?
> My father thinks it could be the return valve. He said that was a
> common problem on earlier Corvettes. Any help would be appreciated in
> getting the diffs working and the dash back together.
>
Corvettes? huh?
For a stereo install you were working in that area so you can rule out
anything wrong under the car I would guess. The first thing to check would
be the bulb connection. Maybe they are actually working but not being
indicated. Second would be a vacuum hose that came off the valve assy. A
few inches later the rubber hose goes to plastic hoses, a little deeper in
the dash, it may have come off there. Third would be the valve itself. Good
luck, it should be an easy fix.
Bob