Re: Audi V8 alignment specs

[Mike Larosa <mlarosa@v8q.East.Sun.COM>]

Here ya go straight from the 90 V8 factory service manual Pg 44-10-1

Test Requirements:

Vehicle not loaded
correct tire pressure
vehicle straight ahead and vehicle bounced
check steering linkage for excessive play
check suspension for excessive play and damage

d=degree

Front Axle:
						+10'
	Total Toe (not compressed)	+10' 	-5'
	
	Camber(straight-ahead position)	-30' +/- 30'
	Max diff between both sides	max. 30'
	
	Toe Angle diff @20d lock
	to left and right		-1d 40' +/- 30'
	
	Caster (not adjustable)		+1d 15' +/- 40'
	Max diff between both sides	max. 1d
	
Rear Axle:

	Camber				-15' +/- 15'
	Max diff between both sides	max. 30'
	
	Toe, each wheel			+5' +/- 5'
	
	Total Toe			+10' +/- 10'

	
>
>Any chance any could jot down the factory specs for alignment on a 90 V8
>for me?
>
>
>

	
    _/_/_/  _/    _/  _/     _/      Mike LaRosa
   _/      _/    _/  _/_/   _/       TSE - HAS
  _/_/_/  _/    _/  _/  _/ _/        1 Network Drive
     _/  _/    _/  _/   _/_/         Burlington, MA 01803
_/_/_/   _/_/_/   _/     _/          			 				     		 
E N T E R P R I S E		     Phone:	781/442-1250
  S E R V I C E S		     Fax:       781/442-1418
				     Email:	mlarosa@east.sun.com