[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 3 more UrQ questions!
>2) The Sending unit on the back of the head near the thermo time switch
>(Temp sender for the "cold engine light") doesnt appear to have a wire
>anywhere near it.. Anyone know where this wire should be coming from?
Bob, I don't have the cold engine light functioning either. I have not
checked to see if it is wired in at the sensor. Sometime last year I
replaced the flex circuit for the dash panel and thought perhaps that is why
it isn't working. Maybe the '85s don't use the light?
Anton
-----Original Message-----
From: -=Bob=- <mx@snet.net>
To: quattro <quattro@audifans.com>
Date: Sunday, November 28, 1999 8:51 AM
Subject: 3 more UrQ questions!
>
>Well, Im wrapping up the engine compartment and everything seems to be
>going OK. But I have more questions...
>
>1) Above the oil pressure sending unit on the block there is another
>sending unit. There is no wire on it.. What does it do? Wheres the wire?
>
>2) The Sending unit on the back of the head near the thermo time switch
>(Temp sender for the "cold engine light") doesnt appear to have a wire
>anywhere near it.. Anyone know where this wire should be coming from?
>
>3) The thermo-pneumatic valve has two outlets.. One side goes to my
>intake, what about the other side? (they are colored)
>
>BONUS ROUND
>
>4) The vacuum plumbing under the fan motor for the injectors... how does
>it route? Where does it go?
>
>Thanks for any help.
>For the record, I got the car with the engine bay pretty well
>disassembled. If I had taken it apart, I would have had some notes to go
>by!
>
>Bob
>
>