Re: turbo oil & water gates.

[Aleksander Mierzwa <alexaudi@kki.net.pl>]

At 08:06 99-12-02 -0800, Gary Erickson wrote:

>> Aluminum fittings could even be welded onto the oil filter
>> housing to run new lines to a new oil cooler too.
>
>Welding isn't necessary at all.  If you unscrew the factory adapters
>from the oil filter housing, you can obtain adapters that will allow
>standard lines (Aeroquip, Earl's, etc.) to connect right up.

The factory oil cooler lines do have standard metric fittings. If Aeroquip
is at least half as good as people say, they should be able to fabricate
lines with metric fittings. 

--
Aleksander Mierzwa
Warsaw, Poland
87 5KT