Re: STILL NEED HELP - Ignition pin out for 89 200TQ

[Huw Powell <audi@mediaone.net>]

try looking in a diagram starting at the chime, not the ign switch, I
bet the wire in question isn;t even on the picture of the ign swq.

btw, if you are going to chop into that wire, let me try to recomend
finding one end of it and re-terminating it, or better yet as I said
ditch the chime or build a breakout and use the signal from that end.

Daniel Hussey wrote:
> 
> Please, any one who can tell me which wire out of ignition is supplied 12V+
> when key is IN ignition (i.e. to door chime relay) I REALLY appreciate
> it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> !!!!!!!!!!!!!!!!!!!
> 
> I have asked a few times, looked in every manual I can find, etc, etc and
> can't find anything.  I just want to do it now so I don't have to tear it
> all apart to do it later.  And, I'd like to start putting my car back
> together again today!  Anyone know???????????????????????????  I know it is
> one of the small wires, but there are three.  Which one (color)?

you could always measure what is present (12v? ground?) at each one
relative to the key presence or absence.

You could also have figured it out prior to taking the car apart.  That
may sound rude but it is good technique and justified by 83 exclamation
points.

I'd look it up for you but my photocopied 200 manuals are locked up next
door.

-- 
Huw Powell

http://www.humanspeakers.com/audi/

82 Audi Coupe; 84 4kq; 85 Coupe GT; 73 F250

http://people.ne.mediaone.net/audi/thoughts.htm