2000 A6 2.7T driveshaft removal

Dave Fain kf21857 at gmail.com
Sun Feb 26 06:37:43 PST 2012

Thanks, I will give that a try.

On Sat, Feb 25, 2012 at 8:02 PM, Peter Golledge <petergolledge at gmail.com>wrote:

> Alternate heat with propane torch and penetrating oil.  An impact bit on
> low after that if you have access to one.  Same treatment works for those
> stubborn axle flange bolts.
> Peter Golledge
> On Feb 25, 2012 4:18 PM, "Dave Fain" <kf21857 at gmail.com> wrote:
>> My A6 has the dreaded center support wobble.  I have removed the exhaust
>> and all the heat shields.  The Allen head bolts on either end of the
>> driveshaft refuse to budge.  Before I get a bigger wrench and strip out
>> the
>> heads, are they installed with Loctite or something that would require
>> heating?  I was expecting to see Torx fasteners but they are regular Allen
>> head bolts.
>> thanks,
>> Dave
>> _______________________________________________
>> quattro mailing list
>> http://www.audifans.com/mailman/listinfo/quattro
>> http://www.audifans.com/kb/List_information

More information about the quattro mailing list