[200q20v] Re: Help! 200 20V No start!

[Paul R Luevano]

C1J1Miller at aol.com wrote:
> 
> Could be a couple things; they messed around right next to the actuator for the cruise, so they might have introduced a vac leak...

	I think it is something like that.  the switched onthe pedal work, as the
cruise is set, just at a much lower "level" than it should be.  I know the
CC had to be removed to get to the distributor.  Is there an adjustment on
it or something that might have got out of wack?

> Do the wipers work?  Sounds like the pump isn't working; or the connection under the hood has popped loose at the jets... any washer fluid sprayed/dribbled around under the hood?  Pull the wires to the pump, and hook up a test light.
> chris

	Wipers work fine. No fluid.  I had a friend stick his ear down by the
pump, and did not hear anything, so sounds like no power to the motor.  It
is going to be a bitch to get too though, with the euros and all.  I was
hoping there was a connector or something ont he firewall that might have
gotten unplugged.

	Will keep updated.

-- 
____________________________________________________________________
Paul Luevano            |  AMA #418487  |'99 CBR 600F4  (Racebike)
http://teamdaemon.com   | USM * CCS #898|'97 CBR 1100XX (Streetbike)      
Waltham, MA USA         |  NMA #116657  |'91 200TQ20V   (Winter)
________"Man's purpose is to live, not to exist."-Jack London_______