[200q20v] FW: [s-cars] 2Bennett 3B oil cooler upgrade

[Beer, Jerald]

Brendan.  
Installed EXACTLY as 2Bennett instructed, which they confimed on the
telephone. I shouldn't have to make additioanl changes if they designed the
kit correctly. That's why I paid there $$$ on the assumption they did the
design work. I could have just added a bigger cooler in the stock location.
Hmmmmmm........
Said I wasn't happy, didn't say they were the next coming of Ivor. And all
IMHO.  The post was a warning to list members who might be thinking of
plunking down $$$ for this upgrade.  Based on my experience, not a good
investment.
Regards,
Jerry
91 200q

-----Original Message-----
From: Brendan Rudack [mailto:rudack at ucsub.colorado.edu]
Sent: Sunday, April 22, 2001 9:05 PM
To: Beer, Jerald
Cc: 200q20v (E-mail); S-Car-List (E-mail)
Subject: Re: [s-cars] 2Bennett 3B oil cooler upgrade


On Sun, 22 Apr 2001, Beer, Jerald wrote:

> I suspect the face up/down configuration has something to do with it.
> No air is flowing over the oil cooler.
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I have no experience with 2B but I wouldn't libel their product until you
correct the above problem.  You did purchase an oil to air cooler, correct?
If I read your note correctly the cooler is lying down, none of the fins
face direct airflow and you did not duct air to the cooler in any way,
right?  Hmmmm....


Brendan Rudack
University of Colorado
Mechanical Engineering