[200q20v] Cupholder for Type 44 Audis

[Pete Kunzler]

Richard,
Do you have any pictures? I might try and order one from here on the other
coast if it's what I am thinking of.

The reason I ask is because a number of years ago my dad gave me a cup
holder that attached to the vents and it worked great in my early 4k but not
in my 87 (the clips would not hold on) I took it apart and mounted it to the
center hump right in front of the e-brake and it stayed with the car when I
bought the 200. Mom's BMW has one and I tried it in the 200 and it works
fine......... she won't part with it.

I thought about going to where dad got them and buying another one but the
air fare to Hong Kong has never come down low enough. :-)

Pete


-----Original Message-----
From: Richard E. Berlin, Jr. <rberlin at feltonberlin.com>
To: 200q20v at Audifans. Com <200q20v at audifans.com>
Date: Friday, April 27, 2001 12:21 PM
Subject: RE: [200q20v] Cupholder for Type 44 Audis


>Here's the best "cup holder" for my '91 Avant:
>
>Go directly to Brookstone and buy their adjustable cup
>holder.
>
>Bring it home and use the adjusta-mount bracket and snap it
>into one of the front/center heater/ac vents.
>
>When done correctly the cup holder will attach securely to
>the air slats, and the unit itself will rest securely on the
>little pencil/coin type shelf directly beneath the vents.
>
>It has worked like e dream. And in the summer, the ac
>passing over the holder will keep your beer cold!
>
>Good luck
>Richard E. Berlin, Jr.
> '91 200q20v Avant
>Email: <rberlin at feltonberlin.com>
>(978) 548-3737
>
>
>
>_______________________________________________
>200q20v mailing list
>200q20v at audifans.com
>http://www.audifans.com/mailman/listinfo/200q20v