[200q20v] replacing a turbo bypass valve

[Forhan, Thomas]

-----Original Message-----
From: Forhan, Thomas 
Sent: Sunday, February 25, 2001 11:08 AM
To: 'omllenado'
Subject: RE: [200q20v] replacing a turbo bypass valve


Easy as pie. Ten minutes, maybe.Can't remember the cost, like $40 or less. 
That might solve it, but before spending the moneylook carefully at the
condition of your crankcase breather hose, and run the error codes from
under the dash. Good luck
 
Tom F.
91 200q20v Avant: new bypass valve, idle stabilization valve, crankcase
breather hose, throttle potentiometer/idle switch, O2 sensor, plugs, wires,
rotor and distributor cap, and no stalling at all!
 

-----Original Message-----
From: omllenado [mailto:omllenado at hotmail.com]
Sent: Sunday, February 25, 2001 2:05 AM
To: 200q20v at audifans.com
Subject: [200q20v] replacing a turbo bypass valve


Would replacing ur turbo bypass valve easy as pie?, how much is the valve? &
recommended stores?.
 
stalling problems getting on my nerve. 1989 Audi 200
 
Thanks in advance audi gurus.
 
Oliver M. Llenado
Denver Colorado 80220
Homepage http://www8.ewebcity.com/omllenado
<http://www8.ewebcity.com/omllenado> 
 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.audifans.com/pipermail/200q20v/attachments/20010225/570b0ff1/attachment.htm