[200q20v] Re: HELP PLEASE!!!

[Brian.Link at Level3.com]

For a 10v motor, I thought the rotor turns counter-clock-wise looking down
on the distributor cap.  

My 89 200 didn't run well when I installed the spark plug wires 1-2-4-5-3
clockwise
Brian Link

--__--__--

Firing order is 1-2-4-5-3
Cylinder #1 is at the front of the engine, and at the front-most position on

the distributor cap.  There should be a metal "scribe" line on the metal
body 
of the distributor under the edge of the cap, right by the #1 cylinder 
position.  Follow the order around clockwise.
Chris
--__--__--

Message: 1
From: C1J1Miller at aol.com
Date: Wed, 3 Jan 2001 23:03:09 EST
To: omllenado at email.msn.com
CC: 200q20v at audifans.com
Subject: [200q20v] Re: HELP PLEASE!!!

In a message dated 1/3/01 9:08:41 PM Eastern Standard Time, 
omllenado at email.msn.com writes:

> Hi,
>  btw nice home web site u got there.
>  
>  
>  my problem is with my 1989 audi 200 turbo.
>  
>  I removed the plug wires from the distributor cap & cleaned the 
distributor 
> cap & rotor with a contact cleaner.
>  my problem is that I don't know that I should have memmorized the right 
> connection from wires to dist cap.
>  my car wont start now.
>  could u help my how to properly connect the wires to the dist cap, which 
> goes where?.
>  
>  Thanks,
>  
>  
>  
>  Oliver M. Llenado