[200q20v] Brake pad question

[Bernie Benz]

Hi Mike,

IMO, a cracked pad surface is no problem unless the material is loose on the
backing plate.  The Jurid 526 FFs were the originals.  What was wrong with
your old rotors, runout?  Check the new ones for the same.  You should
overhaul the calipers and bleed the system while you are into it.

Bernie

> From: "Mike & Tanya Atkisson" <matkisson at yahoo.com>
> Reply-To: "Mike & Tanya Atkisson" <matkisson at yahoo.com>
> Date: Sat, 6 Jan 2001 16:01:48 +0100
> To: <200q20v at audifans.com>
> Subject: [200q20v] Brake pad question
> 
> I recently purchased a used set of UFO rotors and pads for $200.  One of the
> pads has a crack down the middle (See link for picture)
> Can I still use these pads, or do I need to spend big bucks on a new set??
> Thanks in advance for any help,
> Mike
> P.S.  They have Jurid 526 FF stamped on the back of them.  Stock V8 pads??
> 
> http://www.geocities.com/matkisson/UFOpad.jpg
> 
> 
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> 
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v