[200q20v] Re: Oil warning beeps - sporadic

[George Sidman]

Neil:    This is classic instrument cluster malaise, and can
be fixed by removing the cluster and resoldering the
pin-through headers. There are three sets which could be
suspect. I cut the pins off and installed miniature Molex
connectors, routing the wire and connectors outside the
cluster. You may also find some cold solder joints to touch
up. Scott and Blau both have good directions on this fun
job. 2-3 layers of masking tape along the wood trim are
essential to avoid damaging the dash.
-- 
George Sidman, President
Nousoft, Inc.   -   Monterey Network Center
www.nousoft.com  -  www.montereynet.net
sidman at montereynet.net
9701 Blue Larkspur Lane
Monterey, CA  93940
831 657-1510