FW: [200q20v] RE: Greater than 225's?

[Beer, Jerald]

Chris
  I used a Ford tool (BFH) on the rear inside fenders to make, ahem, minor
adjustments for clearance. Only problem with 255's was when the car was
leaned way over to the right (left hand turn) very slight rubbing. Track
tire remains 245-45/16, better fit, many choices.  My et is only 40 IIRC.
Regards,
Jerry

-----Original Message-----
From: C1J1Miller at aol.com [mailto:C1J1Miller at aol.com]
Sent: Tuesday, January 30, 2001 1:01 PM
To: jbeer at boosecasey.com
Cc: 200q20v at audifans.com
Subject: Re: [200q20v] RE: Greater than 225's?


I've been running 255/40r17's et 35 on my car, with no spacers, no rubbing
except driver's rear fender liner, where about 2"x1/8" has worn a bit.
Works fine.
Chris
http://members.aol.com/c1j1miller/