[200q20v] Strut Brace

[C1J1Miller at aol.com]

How about if you buy the Bernie Brace from bernie, and get us to pitch in on a production run?
Chris



In a message dated Wed, 31 Jan 2001  9:40:22 AM Eastern Standard Time, "Forhan, Thomas" <Thomas.Forhan at mail.house.gov> writes:

<< I am interested in doing Bernie's strut brace as well. 

There are only two pieces that need to be fabricated for each strut, the
rest is off the shelf. If several listers are interested we could get one
machine shop to set up and make a run of them. 

Also, I have lying around the house about six feet of 1/2 stainless steel
tubing,
I was thinking of using it instead of the EMT. Any problems with this
approach?


Tom F.

> -----Original Message-----
> From: TM [mailto:t44tq at mindspring.com]
> Sent: Tuesday, January 30, 2001 10:37 PM
> To: Bernie Benz
> Cc: 200q20V mailing list
> Subject: [200q20v] Strut Brace
> 
> 
> Bernie and other listers-
> What strut braces are available for our cars?
> 
> IIRC, Chris Miller's site talks about the S4 strut brace not
> being particularly suitable due to brake reservoir clearance, but
> what options are there?
> 
> The strut brace you designed- is there any source where one of these
> can be purchased/fabricated commercially? I don't have the tools or
> workspace to build my own brace.
> 
> Taka
> 
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v
> 
_______________________________________________
200q20v mailing list
200q20v at audifans.com
http://www.audifans.com/mailman/listinfo/200q20v
 >>