[200q20v] Re: Strut Brace

[Bernie Benz]

Chris, from a strength of materials perspective a bent tube is useless as a
load bearing column, including all of the S4 stock and aftermarket tower to
tower braces.  Further, the brake fluid reservoir is not in the way of a
straight strut to strut brace.

Bernie

> From: C1J1Miller at aol.com
> Date: Wed, 31 Jan 2001 10:44:04 EST
> To: <b.m.benz at prodigy.net>, <t44tq at mindspring.com>
> Cc: <200q20v at audifans.com>
> Subject: Re: [200q20v] Re: Strut Brace
> 
> 
>> IIRC, Chris Miller's site talks about the S4 strut brace not
>> being particularly suitable due to brake reservoir clearance, but
>> what options are there?
>>> 
> 
> 
> The brake reservoir is probably an easy swap; also, you could put on a custom
> bent tube to gain clearance.
> Or get Bernie's setup built by your wrench.
> Chris
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v