[200q20v] RE: Control Arm Help-Done

[Calvin & Diana Craig]

Thanks to all of you who gave suggestions.  I finally wound up buying the
cumalong for $14 and using that...worked pretty well.  I had thought about
that yesterday before I asked but I wasn't sure if that was the right way to
go; but with it working for somebody else I decided to give it a try.  I
used the cumalong with the  subframe mounts loose but not all the way off.
The only thing that I couldn't get exactly right was one of the bushings on
the sway bar that mounts into the right control arm is not seated 100%
symetrically, but it seems to have gotten better after a short drive.  Do
you normally need an alignment after this is done, because it seems to be
doing OK.  Thanks again for all the help!  Next weekend is the brake
accumulator.
--Calvin