Power window switch

[Bernie Benz]

I would still suspect a switch.  Are you sure that the rear windows safety
switch is not activated?  Start over.  Remove both switches and check their
continuity per Bentley 64.43? switching many times, as often they are
intermitent.  Others have had luck dousing the switch with contact cleaner,
but they are a PITA to open up for cleaning and contact adjustment.  When
you have the door switch out you can jump +12 and ground to the motor
terminals to check that the motor drives the window up and down.

Bernie

> From: "Derek Pulvino" <dbpulvino at hotmail.com>
> Date: Thu, 22 Aug 2002 10:56:39 -0700
> To: b.m.benz at prodigy.net
> Cc: 200q20v at audifans.com
> Subject: Re: Power window switch
>
> Bernie,
>
> Tried switching the switches around at both ends (effected door and drivers
> armrest) with swithes that could be confirmed to work both ways  on other
> windows.  This did not fix the problem either.
>
> I wasn't the person who changed around the regulator, but it could also be
> looked at as a way to eliminate all of the variables.  Also, the person who
> did the switching had an extra one around, so the only thing lost was time.
>
> So at this point, would the consensus be "broken wires?"  Everything looked
> good insided the door and between the B-pillar and the door as far as
> fraying and integrity of the insulation.
>
> derek p