A/C-Heater blower motor fix

[Steven Hauptmann]

Chuck,
Congratulations on your acquisition of a wonderful car.

I replaced my blower motor when I did the heater core, so my box was already
out. This is the way Bentley says it must be done, however...
I seem to remember posts where the blower can be changed WITHOUT removing
the housing, so check the archives. I've heard it's tricky (a friend w/ a
5ktq did it), and may require some force to get it out...but I know it can
been done.

Good luck,
Steve Hauptmann
South Carolina, USA
'91 200 20v 148,000miles


 -----Original Message-----
From: 	Chuck Pierce [mailto:cpcycle at deltafreewheeler.com]
Sent:	Friday, August 23, 2002 11:54 AM
To:	200 list
Subject:	A/C-Heater blower motor fix

I now have my Bentley manuals so I can attack some of my gremlins. First
is the blower motor, it only works on quick exits off the freeway ( not
enough of these!!!). From what I have read this means that the bearings
or the brushs are bad. Where does some one get the brushes? Or is it
just better to put in a new blower motor. HAs any one documented these
chore on line?

Chuck
New owner
91 TQ 20v Avant


_______________________________________________
200q20v mailing list
200q20v at audifans.com
http://www.audifans.com/mailman/listinfo/200q20v