Turbo bypass valve copper vacuum hose

[Kneale Brownson]

--
Check with an appliance dealer that has a service/parts department.

At 01:06 PM 07/28/2002 -0400, TM wrote:

>Anyone have any advice on where to find that tubing and also
>where to get a bender for it?
>
>I tried my local Home Depot and even a plumbing supply place and
>they didn't have any, nor did the local hardware store.
>
>Taka
>
>-----Original Message-----
>From: 200q20v-admin at audifans.com [mailto:200q20v-admin at audifans.com] On
>Behalf Of Phil Rose
>Sent: Sunday, July 28, 2002 12:43 PM
>To: BriceW at webtv.net
>Cc: 200q20v at audifans.com
>Subject: Re: Turbo bypass valve copper vacuum hose
>
>
>At 3:20 AM -0500 7/28/02, BriceW at webtv.net wrote:
> >George Sidman recommended that when I change my bypass valve that I use
>
> >1/16" copper refrigerant tubing for the vacuum hose. When I do this how
>
> >do I connect the copper tubing on each end? Chris Miller said to leave
> >3 inches of the rubber tubing on each end and connect the copper tubing
>
> >into that.
>
>Yes? So what problem do you have with that advice? You could leave 6
>inches for an easier connection.
>
>Phil
>--
>
>Phil Rose                               Rochester, NY USA
>'91 200q        (130 Kmiles, Lago blue)
>'91 200q   (57 Kmiles, Tornado red)
>         mailto:pjrose at frontiernet.net
>
>_______________________________________________
>200q20v mailing list
>200q20v at audifans.com http://www.audifans.com/mailman/listinfo/200q20v
>
>_______________________________________________
>200q20v mailing list
>200q20v at audifans.com
>http://www.audifans.com/mailman/listinfo/200q20v
--