by pass valve

[Martin, Gary G]

This should connect to a vacuum line at the rear of the intake manifold.
This line should run alongside the valve cover, under a heat shield maybe. I
can't believe the old bypass valve didn't have this connection. Wierd... See
http://www.sjmautotechnik.com/20vboost.html
<http://www.sjmautotechnik.com/20vboost.html>  for details on this valve.
Make sure the large connection opposite the small one is connected to the
turbo intake hose.
 
Gary 

-----Original Message-----
From: Vincenzo Basile [mailto:Bleaf1 at peoplepc.com]
Sent: Saturday, March 23, 2002 7:26 PM
To: 200q20v at audifans.com
Subject: by pass valve


i recently installed a new by pass valve that i got from blaufrgnugen this
is a bosch 030401450710a wich can be used on the aan engine also. my
question is, this has three ends 1to the turbo intake 1to the turbo outlet
and the other one were does it go,because my old bypass valve only had the 2
connecters to the big hoses, now this one has the little nipple on the
diaphram wich i have no idea were it goes.


This e-mail, including attachments, is intended for the exclusive use of the
person or entity to which it is addressed and may contain confidential or
privileged information.  If the reader of this e-mail is not the intended
recipient or his or her authorized agent, the reader is hereby notified that
any dissemination, distribution or copying of this e-mail is prohibited.  If
you think that you have received this e-mail in error, please advise the
sender by reply e-mail of the error and then delete this e-mail immediately.
Thank you.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 4042 bytes
Desc: not available
Url : http://www.audifans.com/pipermail/200q20v/attachments/20020323/3a083eea/attachment.bin