update on problems/codes

[Mike Miller]

How's the temp gauge reading?? Multifunction SW will cause low boost. Does
the A/C work?

Temp gauge reading low often indicates bad MF SW. As does failed A/C.

mike miller
helmville mt
----- Original Message -----
From: Dan Simoes <dans at audifans.com>
To: Brett Dikeman <brett at cloud9.net>
Cc: 200 20v <200q20v at audifans.com>
Sent: Monday, May 20, 2002 1:08 PM
Subject: Re: update on problems/codes


> Brett Dikeman wrote:
> > One of the codes for engine speed sensor is normal if the car wasn't
> > running.  Run VAG-COM with the engine running and you should get no
> > codes(the speed sensor code disappears if the engine is running.)  If
> > you still get the code, try pulling the flywheel sensors and checking
> > for flakes of metal on the front of the sensor(s).
>
> I did have the engine running.  I also tried logging data, but
> discovered
> that it did not work properly.
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v