no start

[DAK]

I know on my 87 5KTQ, there was an easy way to initiate output tests on
the ECU. I could actuate the fuel pump, cold start valve, etc.
I just looked at my bently under fuel injection and didn't see anything
like that. You might check SJM's site, or someone else will probably
respond about this...

David

On 11/22/2002 1:44 AM, Jeremiah Curry wrote:

> Hi all,
>
> This morning the 200 didn't start.  More accurately it started for about 2
> seconds then died.  It won't start again.  the engine turns over, but no
> start.  I was thinking maybe fuel pump.  I checked the #13 fuse and that was
> fine.  What is the easiest way to narrow down the problem?  I can't here the
> pump and thought I could before, but I'm not sure.
>
> Thanks in advance for any help
>
> '91 Audi 200 20v (won"t start)
> '73 International Scout (won't stop)
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v
>
>