UFO conversion options - plating followup

[QSHIPQ at aol.com]

Bernie FYI:
I spoke to my plating guy today.  He indicated that as long as the vents go
THRU to the hub, you will get plating on the inside of the vanes.  Alas, it
may not be as even or as pretty as on the face of the rotor, but it will
accomplish the same thing wrt the rust issue.  He's also very interested in
what "might" be better for the task.  He didn't buy into my immediate comment
about using ceramic coating, his point being that when ceramic coatings
crack, you get hot spots that can cause more problems than you are trying to
resolve.

HTH

SJ