Noisy after Steering pump replacement in '90 90 20V

[Kneale Brownson]

That kind of noise usually means there's a restriction somewhere in the
system, I believe, Ben.  Can you see fluid circulating normally in the
reservoir during operation?  Maybe a screen in one of the banjo bolts is
plugged???

At 11:46 PM 08/30/2003 +0000, benswann at comcast.net wrote:
>I recently replaced a bad steering pump that had seized in a '90 90 20V with a
>rebuilt unit from one of the commonly used reputable suppliers on the list.
>
>The pump/steering system is noisy with the high pitched type of noise that
>occurs when steering is turned full lock eminating when turning at any
>position
>in range of travel.
>
>Is this a bad rebuild or is there something else to look for.  System was
>fully
>purged and filled with new Pentosin 11S as specified.
>
>Ben