after run turbo pump and high fan speed

Lou.Martin at afscn.com Lou.Martin at afscn.com
Wed Jun 25 10:57:45 EDT 2003


Started troubleshooting late last night, but got dark and cold front chased
me back in the house.

After run turbo pump doesn't run.......any tricks to removing the 2 wires at
the after run temp sensor?  twist or pull straight down?  Water manifold was
still hot so I used long-nosed pliers and broke a rubber boot trying.  Wire
is still connected. Will also check fuse #21.

Fan comes on in fast/jet blast mode.  Where's the thermoswitch and fan
resistor pack?  Several of the relays in the underhood box are missing/not
installed.

Thanks,

LOU MARTIN
California 1991 200q20v now in Monument, CO



More information about the 200q20v mailing list