No subject

installation, causing unequal stretch and deflection of the ring as the
cylinder head was screwed into place.  Grease well!  NEVER hold the rack
against the end stops!

Bernie

> From: Steve Hackett <sbhack at ntplx.net>
> Date: Wed, 16 Apr 2003 13:19:00 -0400
> To: 200q20v at audifans.com
> Subject: hyd pump cap seals
>
> Have had 3 cap orings blow out in a row (3 different pumps - last one was a
> reman), sometimes sounds like a firecracker.  Suspect blockage
> somewhere.  Steering is OK but brake pedal seemed hard before
> shutdown.  Any BTDT experience ?  Thought the pumps had relief valves in
> them - guess not.
> Planning on cleaning and checking all lines and banjo bolts.
>
> TIA,
> Steve Hackett
>
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v