Poor warm restart idle and more

[Kneale Brownson]

Last set of G60 pads I bought had the holes on both inner and outer for the
retainer screws used on the outers.

At 09:00 AM 7/2/2004 -0700, Bernie Benz wrote:
>
>
>> From: Kneale Brownson <knotnook at traverse.com>
>> 
>> At 06:25 AM 7/2/2004 -0700, Bernie Benz wrote:
>> 
>>> 
>>> What's wrong with your UFO rotors?  DFI if IAB!  My only complaint
about the
>>> UFO design is that the pads are not interchangeable, inside to outside.
 Too
>>> bad for maximizing pad life!  Will FWD my UFO pad info, Paul.
>>> 
>>> Bernie
>> 
>> Shouldn't pad wear be about the same inside to outside if you have the
>> caliper in good working order?
>Should be about the same, but is less even on my UFOs than on the G60s, even
>with guide pins well lubed.  G60 pads can be reversed if you don't use the
>unnecessary retaining spring supplied on some of the outboard pads.
>> 
>> 
>