Part #s/FAmily Album for 3b

The Corbs c.corbishley at comcast.net
Fri Jul 2 20:56:33 EDT 2004


Thanks Kneale:

I called Clair back today, and Barry was incredibly helpful.

Unfortunately, he was not the one who helped me initially.  The first guy
failed to notice that ETKA specifies two additional parts that are required
to seal this new aperture.

Another week lost, but at least I've found a really helpful source.

John Corbs

----- Original Message ----- 
From: "Kneale Brownson" <knotnook at traverse.com>
To: "The Corbs" <c.corbishley at comcast.net>
Sent: Thursday, July 01, 2004 10:29 PM
Subject: Re: Part #s/FAmily Album for 3b


> My version of FA says it doesn't recognize the number with the "D" added.
>
> If it fits otherwise, can you just plug the hole?  Maybe tap it and put a
> bolt in?  Maybe put an O ring or crush washer under the bolthead?
>
> Regards, Kneale
>
> At 08:57 PM 7/1/2004 -0400, you wrote:
> >Hi Kneale:
> >
> >Sorry to bug you again.  Clair told me that they could not find
034-103-627,
> >and sent me 034-103-627D.
> >
> >It looks correct other than there is a hole on top that looks like a
> >breather or similar coupling.  I'm sure that there was nothing connected
to
> >the one that I'm replacing.
> >
> >Would you mind looking to see what ETKA says about the "D" model?
> >
> >Thanks
> >
> >John Corbs
> >
> >
> >----- Original Message ----- 
> >From: "Kneale Brownson" <knotnook at traverse.com>
> >To: "The Corbs" <c.corbishley at comcast.net>; <200q20v at audifans.com>
> >Sent: Sunday, June 27, 2004 5:43 PM
> >Subject: Re: Part #s/FAmily Album for 3b
> >
> >
> >> FA #s for the "cover" on the oil sump is  034 103 627,  the seal is
034
> >> 103 043  and the cap bolts are  M6X22, # N101 987 01.
> >>
> >> This doesn't look in the drawing as though you'd call it a plate.  On
my
> >> car, it looks like it sticks out several inches.
> >>
> >> Does this mean you've got a house in Florida with a shelter for your
hoist
> >> and all?  Do you still have the UrQ?
> >>
> >> At 05:20 PM 6/27/2004 -0400, The Corbs wrote:
> >> >Hey Guys:
> >> >
> >> >Finally into our own place again and a chance to address the oil leak
> >that
> >> >has plagued my 200 donor since I got it.
> >> >
> >> >The leak was coming from the junction of the "inspection" plate in the
> >> >passenger side of the sump right at the front.  I bought a new gasket
> >ages
> >> >ago and expected a very quick and easy repair.
> >> >
> >> >Not so.  I found that it appears to have taken an impact at the bottom
> >which
> >> >has cracked this plate and bent two of the cap screws that secure it.
> >> >
> >> >Thus I would ask for you help in establishing the part #s for the
plate
> >> >itself and the cap screws that secure it.
> >> >
> >> >I will obviously attempt to source replacements from a dealer.  Any
other
> >> >more cost effective suggestions would be most appreciated.
> >> >
> >> >I have lost my access to the family album in the move.  Any
suggestions
> >for
> >> >replacement would also be most appreciated.
> >> >
> >> >Thanks
> >> >
> >> >John Corbs
> >> >
> >> >
> >> >_______________________________________________
> >> >200q20v mailing list
> >> >200q20v at audifans.com
> >> >http://www.audifans.com/mailman/listinfo/200q20v
> >>
> >>
> >
> >
>
>




More information about the 200q20v mailing list