Changing hydraulic oil?

Kneale Brownson knotnook at traverse.com
Fri Jun 18 11:46:10 EDT 2004


Took one can to fill the reservoir and pump when I changed the pump last
fall on the 200q20v.   Don't know how much more it would take to refill the
lines/rack.   If you have a leak and are putting in some sort of sealant, I
wouldn't bother with trying to change the fluid.  The two types CAN be
mixed.  The newer synthetic just has a greater temperature range.   I'd
just keep the 11S around until you get your leak resolved.

At 10:58 AM 6/18/2004 -0400, PeterBergin at aol.com wrote:
>My steering rack leaks a small amount.  So I stopped by the local dealer to 
>buy some Pentosin.  Ask for specific oil for my car and was sold the old
stuff 
>by mistake which I added unknowing.  
>
>So now I have two cans of the correct synthetic Pentosin to change out the 
>system.  However after thumbing through my Bentley, I haven't found 
>information 
>on how to change out the old Pentosin and how much the system holds.  Also 
>bought some hydraulic oil stop leak from Blau. to add to the system.
>
>Can any one give me so quick advice?
>
>Pete
>91 Avant
>_______________________________________________
>200q20v mailing list
>200q20v at audifans.com
>http://www.audifans.com/mailman/listinfo/200q20v



More information about the 200q20v mailing list