Power Steering Pump

[Ingo Rautenberg]

Wow!  Never heard of that happening.  Anyhow, assuming you can remove the
bolt without messing up the threads, you should get a replacement one from
Audi (I believe it has a special valving incorporated into the bolt).  I
believe the P/N 443 422 923 is the one for the high pressure line Banjo bolt
to the hydraulic pump.  Don't forget two N 903 633 01 13 x 2.5 O-rings.

HTH

-Ingo
'91 200q20v...Slightly modified
'84 Tornado Red Urquattro Euro spec
'91 v8 quattro 5-Speed (not exactly stock) :-)
'91 V8 pearl (new addition)
http://hometown.aol.com/quattringo/index.html

----- Original Message ----- 
From: <todnad at comcast.net>
To: "200q20v list" <200q20v at audifans.com>
Sent: Monday, November 08, 2004 11:17 AM
Subject: Power Steering Pump


> Bolt snapped where (appears to be h.p. side) hose connects to pump (was
making a sharp turn at a very slow speed - heard the snap then lost
steering/brakes).
> Can I just replace bolt or purchase rebuild kit?
> ?Best place for either?
> 1/4 of the bolt is still seated in the hole but should be able to get it
out in one peice (I hope).
> Thanks,
>
> TT
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/2004