20V 200TQ Quattro tranyy WEIGHT
Dan Cordon
cord4530 at uidaho.edu
Sun Jan 9 15:21:21 EST 2005
Denis et. all-
Sorry I didn't respond quicker. I was out all yesterday. I weighed the
transmission today, and much to my surprise (especially after all the
other posts on the subject) mine weighs in at 173 lb. It still has oil
(about 2/3 of full), the seat tensioning bracket, most of the shifter
assembly, and about 2" of the rear driveshaft.
This *is* a torsen 016 as well. I would have expected it to weigh a bit
more than the regular 016.
As for getting rid of it...that depends. I have a 200 20v that will
eventually be a doner for a 90-91 coupe quattro. I bought this trans as
a spare. But on several CQ conversions I've heard they keep the coupe
transmission. This this always the case? If so, I won't need to keep
this one around. But if there's some reason to use the 016 torsen, I'd
like to know.
Denis wrote:
>
> If you find time it ll be great to get digital :-). It s for shipping.
>
> You need yours ?
>
> You know, here (Quebec, Canada) 5000TQ and 200TQ dont stay in
> junkyard cause nobody wants them anymore :-(, they goes for metal)
> But if i want to buy one ,,, ouch mmmmmm they dont sell them for
> peanuts :-), bizzard.
> I just got 5000TQ 016 for free :-). But its 3.89 ratio
> The 20V 200TQ has 4.11 ratio, its what i need to fit the rear diff
> ratio 4.11 for A4 project, with V8 3.6
>
> If you want to sell it for very cheap i would considere it .
>
> Thanks
>
> Ðenis
>
> ----- Original Message -----
> From: Dan Cordon <mailto:cord4530 at uidaho.edu>
> To: quattro at audifans.com <mailto:quattro at audifans.com>
> Sent: Saturday, January 08, 2005 11:56 AM
> Subject: Re: 20V 200TQ Quattro tranyy WEIGHT
>
> > How much weight a 20V 200TQ tranny ?
> >
> > thanks
> >
> > Ðenis
>
> How precisely do you need the weight. I have one sitting in my
> shed that
> I could put on a digital scale. But based on just moving it
> around I'd
> guess it's between 100 and 150 lb. Let me know if you'd like a
> finer
> measurement.
>
> --
> Dan Cordon
> Mechanical Engineer - Engine Research Facility
> University of Idaho
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com <mailto:quattro at audifans.com>
> http://www.audifans.com/mailman/listinfo/quattro
>
--
Dan Cordon
Mechanical Engineer - Engine Research Facility
University of Idaho
More information about the 200q20v
mailing list