radiator end tank seam leak

[Bernie Benz]

If the leak is around the rubber gasket between the aluminum core and the
plastic end tank, radiator stop leak may work.  Crimping down tighter on the
rolled header plate tabs holding the plastic the end tank may also help.  If
it is a crack in the plastic of the end tank, as I had a short time ago,
you're ready for an new radiator, unless you want to remove the end tank and
try epoxy patching from the inside.

Bernie

> From: "dschaible at hvi.net" <dschaible at hvi.net>
> Date: Mon, 14 Mar 2005 11:49:29 -0500
> To: 200q20v at audifans.com
> Subject: radiator end tank seam leak
> 
> the seam where the plastic end tank is crimped onto the radiator core is
> leaking.  any btdt?  will leak stop work ??
> 
> _______________________________________________
> 200q20v mailing list     http://www.audifans.com/mailman/listinfo/200q20v