Strut bearing plate 200q20v Digest, Vol 19, Issue 9

[SuffolkD at aol.com]

http://www.quattro123.com/200Type44Suspension.htm
Has mostly 10V items but I break down the 2B camber plates with a photo for 
detail.
The Watkins Glen and Mt Tremblant track events have more 2B photos.
-Scott by BOSTON

> From: Chuck Pierce <>
> It is time to finish going through the front suspension.
> I am going to replace the sub-frame bushings, the control arms, shocks 
> and springs.
> While doing this I want to correct and allow for adjustment in  camber 
> when i get done putting it back together.
> I do not really want to buy the 2B plates, so I am trying to do this 
> cheaply.
> I have been looking at the bentley, so i get an idea of what the parts 
> look like.
> Has any one here tried redrilling the bearing plates per Igor Kissel's 
> drawing for the Urs 6 plates to give more adjustment for the camber?
> Does  any one have a picture of the strut bearing plate (from a 200tq)?
> Better yet does someone that has done the 2B camber plates have a couple 
> of bearing plates they would like to get out of their garage
> This way I can see what will work before I take the car apart.
> Sorry to ask so many questions, I just like to know where I am going 
> before I start taking the car apart.
> 
> Thanks  Chuck