Steerig column mount loose

[Chuck Pierce]

 Thanks Peter and Kneale

Kneale it is as Peter stated a press fit no bolts at this point.
I will probably pull the steering wheel off and move the switch assembly 
out of the way and then find a way to put the squeeze on it.
Thanks  again for the response. sure glad the list is working again
Chuck Pierce
91 200 tq Avant

Peter Schulz wrote:

> Chuck:
>
> Its a tapered, press fit....
> You may have to use a clamp to get it snug...
>
> BTDT
>
> -Peter
>
> At 11:21 PM 11/27/2005, Chuck Pierce wrote:
>
>> I pulled every thing apart to fix the bad ignition switch. As usual I 
>> pulled everything to far apart.
>> I popped the steering column dove tail apart to get the switch/lock 
>> assembly out.
>> I have everything back together, but the steering column is loose 
>> where the mount dove tails together.
>> Has anyone put this back together? If so how did you get the dove 
>> tail portion to get tight and stay tight?
>>
>> Thanks
>> Chuck Pierce
>> 91 200tq Avant
>>
>>
>> _______________________________________________
>> 200q20v mailing list    http://www.audifans.com/mailman/listinfo/200q20v
>
>
> 1991 200 20v Q Avant Titan Grey
> 1991 200 20v Q Avant Indigo Mica
> 1991 90 20v Q Red
> 1990 CQ silver (awaiting S2 engine transplant)
>
> 1990 CQ red ( to part or not)
> Chelmsford Ma, USA
>