Blink Code 2111

[Kneale Brownson]

Actually, Bernie, the Bentley calls for the ignition timing sensor to be
0.45-1.25 mm from the pin.  The RPM sensor is supposed to be 0.50-1.25 mm
from the flywheel teeth.  Pages 13.34 & 13.35 describe how to place feeler
gauges for these measurements.


At 04:50 PM 12/2/2006 -0800, Bernie Benz wrote:
>You can certainly check the sensor for open or short. Pull the sensor and
>check/clean its face. Reinstall with it as close as possible into the FW
>teeth, no adjustment here I think.