Anyone have a used 3b chipped ecu, or 20vt eproms for a reasonable price?

[alan cordeiro]

There were a few group buys, with Ned Ritchie (IA) and Mineah Cotet
but each required the pressure transducer to be replace or "modified"
to read from 0 to 2.5 bar  (presently it reads 0-2 bar)

Ned required ECUs to be sent to him, and he upgraded them,
checked them and sent them back.

A bunch of us removed transducers and sent them to Mineah
and he "adjusted " them to go 0-2.5 bar, then we replaced the
EPROMs ourselves.

Also just FYI, the EPROMS are already in sockets. The
absolute pressure transducer requires unsoldering/resoldering

Alan

----- Original Message ----- 
From: "Brian Larson" <brian.erin at gmail.com>
To: <200q20v at audifans.com>
Sent: Sunday, January 08, 2006 8:45 PM
Subject: Anyone have a used 3b chipped ecu,or 20vt eproms for a reasonable
price?


Does something like qlcc exist for the 3b motor for the DIY'er with access
to an eprom burner, a couple of machined pin sockets, and a soldering
station?

Thanks,
Brian
_______________________________________________
200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v