Anyone have a used 3b chipped ecu, or 20vt eproms for a reasonable price?

[Bernie Benz]

> From: "alan cordeiro" <alancordeiro at comcast.net>
> 
> There were a few group buys, with Ned Ritchie (IA) and Mineah Cotet
> but each required the pressure transducer to be replace or "modified"
> to read from 0 to 2.5 bar  (presently it reads 0-2 bar)
> 
> Ned required ECUs to be sent to him, and he upgraded them,
> checked them and sent them back.
Ned, in secert, replaces the stock eprom socket with a rewired, scrambled
socket after which one (novice) can not go back or forward without going
back thru IE, or removing his socket mod. and restoring a standard socket.
Bummer!
> 
> A bunch of us removed transducers and sent them to Mineah
> and he "adjusted " them to go 0-2.5 bar, then we replaced the
> EPROMs ourselves.
Using Mineah's eproms I assume.  A good alternative, IMO.

Bernie
> 
> Also just FYI, the EPROMS are already in sockets. The
> absolute pressure transducer requires unsoldering/resoldering
> 
> Alan
> 
> ----- Original Message -----
> From: "Brian Larson" <brian.erin at gmail.com>
> To: <200q20v at audifans.com>
> Sent: Sunday, January 08, 2006 8:45 PM
> Subject: Anyone have a used 3b chipped ecu,or 20vt eproms for a reasonable
> price?
> 
> 
> Does something like qlcc exist for the 3b motor for the DIY'er with access
> to an eprom burner, a couple of machined pin sockets, and a soldering
> station?
> 
> Thanks,
> Brian
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
> 
> _______________________________________________
> 200q20v mailing list     http://www.audifans.com/mailman/listinfo/200q20v