Group buy - short shift kit, power train mounts

Sun Jan 29 13:54:22 EST 2006

Group-

I have about ten requests for the shift kit and motor/tranny mounts. Need 10
more. I would again steer those with interest to the following links:

http://www.motorgeek.com/phpBB2/viewtopic.php?t=7996
(Please see the Jan 6 post for an opinion on the increase in vibration of
the mount kit)

http://www.034motorsport.com/product_info.php?cPath=25_66_68&products_id=336

Also, any members who bought the shift kit in the past, if you could post a
quick opinion?

Thanks all,

Dr. Gratz

On 1/29/06, 200q20v-request at audifans.com <200q20v-request at audifans.com>
wrote:
>
> Send 200q20v mailing list submissions to
>        200q20v at audifans.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://www.audifans.com/mailman/listinfo/200q20v
> or, via email, send a message with subject or body 'help' to
>        200q20v-request at audifans.com
>
> You can reach the person managing the list at
>        200q20v-owner at audifans.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of 200q20v digest..."
>
>
> Today's Topics:
>
>   1. Headlight Protective Tape? (Derek Pulvino)
>   2. '91 200 20V TQ Audi / Bose Radio Problem (Michael Palatas)
>   3. Strut Bar Type 44  (Chuck Pierce)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 28 Jan 2006 11:24:18 -0800
> From: "Derek Pulvino" <dbpulvino at hotmail.com>
> Subject: Headlight Protective Tape?
> To: 200q20v at audifans.com
> Message-ID: <BAY105-F125254299395743CE8FEFABE170 at phx.gbl>
> Content-Type: text/plain; format=flowed
>
> Anybody have a fave?  My packing tape again sprung a leak on one of my
> lights, and I figure it I'm going to take the light out and dry it, might
> as
> well apply a more permanent solution this time. So...
>
> Derek P
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 28 Jan 2006 12:38:53 -0800 (PST)
> From: Michael Palatas <mpalatas at sbcglobal.net>
> Subject: '91 200 20V TQ Audi / Bose Radio Problem
> To: 200q20v at audifans.com
> Message-ID: <20060128203853.10250.qmail at web80508.mail.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Symptom:
> A few weeks ago, the radio started not turning on when the knob was taken
> from off to on.  You could get it to turn on by jiggling the knob as you
> turned it on, or by putting pressure on the knob in a certain direction as
> you turned the knob.  The jiggling method worked less and less over the last
> few weeks, and now, turning the knob (jiggling, pressure, or not) has no
> effect.  The radio is "dead".
>
> Questions:
> Anyone have any BTDT stories?  It would appear to be associated with the
> knob contact inside the radio, but perhaps someone else has another
> experience.  Is it time for the radio replacement effort?  It would be nice
> to have a CD!!
>
> Mike in KC
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 28 Jan 2006 14:07:49 -0800
> From: Chuck Pierce <cpcycle at earthlink.net>
> Subject: Strut Bar Type 44
> To: i2k at xmission.com,  cdoubet at msn.com,  Jason.Broussard at CH2M.com,
>        200 list <200q20v at audifans.com>
> Message-ID: <43DBEB35.5010101 at earthlink.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi Guys
> Sorry to be quiet about this lately.
> We test fit the one we built to both the cars (91 200tq 20v) we have
> available and it fits.
> The friend that is actually building these is constructing a jig to
> allow him to build them w/o using my car as the jig.
> With luck he should have the jig and another bar assembled in the next
> week or so. We will then make sure that the new bar fits both cars
> and then build the remaining bars. I will try to keep you updated. If
> there is any questions please ask. I am back in school  and
> I some what ignore what is not directly in front of me.
> Any profit on these bars after paying for the materials, is going to
> this friend that has spent a lot of time drawing the bar up and doing
> the actual construction.
> I basically was the idea person and helped in the initial construction
> for the right look and position.
> ( It had to be cute Bernie)
> Also if you need to get more camber adjustment if you have lowered your
> cars, we built a jig to do the Igor Kissel mod to the strut plates.
>
> http://www.elektro.com/~audi/alignment/
>
> This mod give 4 mm more adjustment. Igor mod was for the URS6 cars but
> it will work on ours.
> If you do this and grind the strut bushing slots you can come with a
> decent additional amount of adjustment.
> I ahd a problem with the PDF file printing at the right size to use as
> an template. So the result was a jig.
> My friend will do the mod for $30 + shipping
>
> This friend of mine a machinist by training, so close does not cut it (
> would for me, but then that is why I am not a machinist)
> Using the jig to repeat the process keeps the work accurate.
>
> Take care
> Chuck
>
>
> ------------------------------
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v
>
>
> End of 200q20v Digest, Vol 27, Issue 37
> ***************************************
>