Fault Codes update, No-Start 200q20v

[motogo1]

The 513 is not true because the engine wasn't running. So I would say 514 is
the true code.

Gary Martin
94 UrS4
91 200 TQA

----- Original Message ----- 
From: <TooManyAudis at aol.com>
To: <200q20v at audifans.com>
Sent: Sunday, July 23, 2006 10:38 PM
Subject: Fault Codes update, No-Start 200q20v


> After much investigation, I tracked down the problem with my Vag-Com to be
> that I was attempting to use a newer version of the software with an older
> style  interface cable.
>
> Cranked the engine and got the following codes:
>
> 00513 -- engine speed sensor
> 00514 -- ignition reference sensor
> 00523 -- intake air temp sensor
> 00516 -- idle switch
>
> Clearing the codes, then cranking the engine resulted in tripping the
00514
> or 00513 codes.
>
> Any thoughts as to where I should first concentrate my efforts?
>
> Thanks,
>
> Tom
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>