Light Switch Harness

[Kneale Brownson]

No secret retainers for the light switch harness connectors.  I use a
flat-bladed screwdriver that has a 90-degree bend in its shank so I have
something to push with.  Where did you find a "new harness" with new
connectors?

While you have the connector off, take a piece of emery cloth and clean up
the male contacts on the back of the switch.  If you've had connector
plastic melting, the contacts will be contaminated with the plastic.  


At 09:47 AM 6/6/2006 -0700, Derek Pulvino wrote:
>Gang,
>
>I bought a new harness for the wiring cluster on the steering column where 
>the lights plug in.  Hopes are that replacing this and the wires running 
>to/from the low/high beam switch will cure my intermitent low beam loss.
>
>Last time I dug in there, I remember trying to push pretty hard to try and 
>get the harness off, but that it wouldn't budge.  Anybody with hints on 
>this?  I don't think there's any tabs I need to release to remove the 
>harness, are there?