Heater Core

[Ed Kellock]

I've seen them break in that manner as well.  It was fairly evident after
only a little working of the wire.  These will have an acute bend where the
wire is broken inside.

On 9/19/06, Kent McLean <kentmclean at mindspring.com> wrote:
>
> PeterBergin at aol.com wrote:
> > On the door wires, just pull off the rubber boot that goes between the
> door
> > and body, any broken wires are easily spotted.
>
> Maybe not "easily".  I just got an email from Massar Atilla Valter,
> who had a power window problem back in May. He recently found the
> cause -- 2 wires broken; one was visible, but the other one was
> inside the insulation.  So you may need to pull, push, bend, and
> twist those wires to spot that bad one(s).
>
> --
> Kent McLean
> '94 100 S Avant, "Moody"
> '89 200 TQ, "Bad Puppy" up in smoke
>
> _______________________________________________
> 200q20v mailing list     http://www.audifans.com/mailman/listinfo/200q20v
>