Bentley Chap 27 (90 200 10V)

[Chuck Pierce]

Eric
You must be crazy!!!
Chp. 27 should be in volume 1.
Well at least it is my version.
Chuck Pierce
91 200 20v Avant

Eric Huppert wrote:

>Gentlemen,
>
>Had a problem with my sons 90 200 starting circuit and dug into it last
>night. He got tired of parking on hills for two weeks and decided to come
>home so dear old dad could fix it.
>
>Bentley wiring diagram is somewhat vague again... Doesn't really show all
>that much as far as relays, etc.
>
>Replaced Ign switch which I assumed was the problem as it wasn't quite right
>anyway. Turned out housing was cracked (spring) which is fairly common
>anyway. Replaced switch and still no power to solenoid. Wire to solenoid was
>crappy, but still intact.
>
>Per Scott M, jumpered across anti theft relay to eliminate relay. Still no
>power.
>
>Ended up getting extremely lucky while starting to work back in wiring loom.
>No power by right frame rail. Cut sheathing open near front of radiator. Two
>inch slice and the corroded/broken wire was right there! Pulled headlight
>for easier access to solder and splice in patch. Of course corroded wire
>doesn't take to solder very well so ended up using good butt splices and
>short length of wire...
>
>REAL QUESTION IS: My Bentley set does not have chap 27 in it. Bentley for my
>sons old type 89 had 27 out of sequence, but the set for the 100/200 doesn't
>have it at all. Publisher error or am I losing my mind????
>
>Eric
>
>_______________________________________________
>200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v
>
>  
>