Valve seal replacement finished/tips

[Bernie Benz]

> From: "Eric Huppert" <dragracer at netstep.net>
<snip> 
> Cap and rotor, easier to get to with TB removed. Ensure you have the right
> rotor (Google Audifans!) I ended up    with the wrong new one. Rotor in the
> car had been cut down to 11mm. Very interesting, probably done with a
> dremel! Left the same one in. Cap had oil residue, could have cleaned up but
> replaced as access easier

Eric,
Oil in the 20V distributor implies excessive blow by and/or a restricted CC
breather system. This dist. has no oil seal, just a spiral groove pump on
the shaft, which is easily overcome with excessive CC pressure. At 220K my
dist is bone dry, maybe because of my pieced together, old radiator and
heater hose breather system? Narrowing the rotor tip is a common fix for the
more available 7A rotor.

Bernie