Transmission questions

alancordeiro at att.net alancordeiro at att.net
Wed Apr 22 17:40:44 PDT 2009


Ben,

Sounds like the V8 one would work. The most important ratio is the final 
drive. Since you have the 200q rear diff on the car, (and most likely are 
not planning on swapping it as well) the final drive ratio for the front 
wheels must exactly match the ones at the back. The other ratios are icing 
on the cake...


----- Original Message ----- 
From: "Lavine, David" <David.Lavine at energizer.com>
To: "Ben Swann" <benswann at verizon.net>; "'200q20V mailing list'" 
<200q20v at audifans.com>
Sent: Wednesday, April 22, 2009 3:07 PM
Subject: RE: Transmission questions


> type44 v8q- 1991 tranny case 016- torsen center differential
> 1st-3.500
> 2nd-1.889
> 3th-1.231
> 4th-.903
> 5th-.730
> final-4.11:1
>
>
> type44 20v 200-1991 tranny case 016- torsen center differential
> 1st-3.600
> 2nd-2.125
> 3rd-1.360
> 4th-.967
> 5th-.730
> final 4.11:1
> Stolen from motorgeek. Scottmandu had a couple of V8 transmissions for 
> sale don't know if he still does.
>
> -----Original Message-----
> From: 200q20v-bounces at audifans.com [mailto:200q20v-bounces at audifans.com] 
> On Behalf Of Ben Swann
> Sent: Wednesday, April 22, 2009 3:03 PM
> To: 'Brett Dikeman'
> Cc: quattro at audifans.com; '200q20V mailing list'
> Subject: RE: Transmission questions
>
> Brett,
>
> Assuming I install the trans on a 200Q with engine that will deal with 
> torque, will it
> work OK - bolt up using 200 flywheel and clutch and work OK with final 
> drive to rear
> diff?  I don't think gear ratio would be a problem unless the first gear 
> were especially
> high.  I was looking to mate the trans with a more powerful I5 engine - 
> although it
> would not be as torquey as the V8 to be sure.
>
> Ben
>
> -----Original Message-----
> From: Brett Dikeman [mailto:brett.dikeman at gmail.com]
> Sent: Wednesday, April 22, 2009 2:25 PM
> To: Ben Swann
> Cc: 200q20V mailing list; quattro at audifans.com
> Subject: Re: Transmission questions
>
> On Wed, Apr 22, 2009 at 1:50 PM, Ben Swann <benswann at verizon.net> wrote:
>
>> I have a 200Q20V with broken input shaft - amazing and never saw this 
>> happen before.
>
> Yikes.  That is...unusual.
>
>> Is V8 quattro transmission a bolt-in with same ratios?
>
> The 5-speed?  No, the gearing is different for the torque-y V8.
> You're far more likely to find a 200q20v transmission, regardless.
>
> Brett
>
> _______________________________________________
> 200q20v mailing list     http://www.audifans.com/mailman/listinfo/200q20v
>
> This email and any files transmitted with it are confidential and intended 
> solely for the use of the individual or entity to whom they are addressed. 
> If you are not the named addressee you should not disseminate, distribute, 
> retain, or copy this e-mail or any attachments. If you have received this 
> email in error please delete and notify the sender.
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v 



More information about the 200q20v mailing list