Coolant pump, thermoswitch

[Austin Calise]

Danny, the switch is on the water manifold under the intake manifold kinda got just reach your arm in there from above. Keep in mind the afterun fan will only run if the car is really hot at shut down. Link to pic of the location of the sensor  http://www.sjmautotechnik.com/trouble_shooting/cooling.html#after
As far as the switch attached to the water pump I assume you mean the aux. electric h20 pump? It's not a switch at all, it is just the pumps electrical connector.

HTH's Austin

--- On Sun, 3/22/09, Danny <pyro_10314 at yahoo.com> wrote:
From: Danny <pyro_10314 at yahoo.com>
Subject: Coolant pump, thermoswitch
To: 200q20v at audifans.com
Date: Sunday, March 22, 2009, 4:18 PM

Whats up all. Decided to finally try to figure out why my after run fan doesnt
come on.  the bentley says to disconnect the thermoswitch wires and attach em
together. I havent really gone crazy at it, but my question is, how the hell do
you reach it? From underneath? Anyone btdt? Also what does the switch attached
to the coolant pump do? the bentley doesnt show it, although im probably lookin
at the wrong page. tia
Danny



      
_______________________________________________
200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v