pump to rack hose

[Bernie Benz]

Are you trying this with the pump end free? Should make it easier.


On Sep 25, 2009, at 7:33 AM, feelstranger wrote:

> Wow, no joke.  Spent a good long time last night attempting to get  
> the banjo
> bolt back in...
> Had to leave it alone for another try today.
> What a PITA.
> Maybe my wife's small hands?
> BTW, taking it off was easy with a "gear wrench"
>
> --------------------------------------------------
> From: "Tony Hoffman" <auditony at gmail.com>
> Sent: Monday, September 21, 2009 2:28 PM
> To: "Austin Calise" <yoda_audi at yahoo.com>
> Cc: <200q20v at audifans.com>
> Subject: Re: pump to rack hose
>
>> And, bolting it back on is even worse! That's why I use Spokane house
>> of hose. They put swivel fittings on the ends, and you can just put
>> the end on the rack first, then the rest of the hose on that. BTDT
>> both ways, it's about ten times easier with the swivels. And, they  
>> are
>> not very expensive at all.
>>
>> Tony
>>
>> On Sun, Sep 20, 2009 at 8:31 PM, Austin Calise <yoda_audi at yahoo.com>
>> wrote:
>>> Nat, cheapest place would be germanautoparts.com be well aware that
>>> unbolting said hose from the rack is a nightmare.
>>>
>>> HTH's Austin
>> _______________________________________________
>> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>>
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v